Oval Door Sign Pull
Oval Door Sign Pull
2 in stock
Couldn't load pickup availability
Antique reproduction brass door sign plate.
A brass sign attached to a door handle.
Oval type that can be installed in narrow places.
Although it is written in English, it is written vertically, but it is easy to read.
Each product is hand-polished one by one to reproduce an antique texture. It is not protected with a modern paint, so you can enjoy the aging that appears as you use it.
Click here for the product page of "Push"
[Product Details]
Size: About W34×H102×T4mm
Material: Brass
Accessories: Mounting screws *Made of iron (it may rust.)
remarks:
- There is an error in the size.
- There may be scratches or chips on the surface.
- The texture and texture of the surface may differ depending on the arrival, so it may differ from the photo.
- Because it is handmade, there are individual differences in size, texture, and texture.
- The included screws are made of iron and may rust. Especially when using in a place where water splashes, such as outdoors, prepare screws made of rust-resistant material separately.
Handling of brass products
About brass and aging
- Products made from solid brass will change color over time. Please understand it as a characteristic of the material.
- Aging does not always occur uniformly across the product, and unevenness may occur at first. It takes time to get used to the whole thing, so please enjoy the process.
- In places where it is exposed to rain or splashes of water, the surface may have a pattern of raindrops.
- Parts touched with bare hands may cause discoloration, so it is recommended to wear unused gloves made of soft material when handling.
- If you want to slow down the aging process, apply beeswax on a regular basis to give it a glossy look and keep it in the same condition as when it was delivered. (* Beeswax cannot be used on clear coated products. Wipe off with a dry cloth. )
* Secular change may occur before delivery. Please understand beforehand as a characteristic of the material.
*The method and speed of change will vary depending on the installation environment.
* Strong changes may occur in areas where there is a possibility of salt damage.
Care instructions
- If you are concerned about dust or dirt, wipe it with a soft, dry cloth. If the dirt is strong, you can wipe it with water, but be sure to wipe it with a dry cloth at the end.
- If patina (a type of blue-green rust) develops and bothers you, gently polish it with a brass polishing cloth. Please refrain from wiping with chemicals as it may cause uneven wiping.
- If rain or hand prints become black, the blackened area is not dirt but a chemical change, so it cannot be wiped off. Such traces overlap to create an antique texture. As time passes and the overall color changes to a deeper color, the marks will become less noticeable, so please keep an eye on it for a while.
- If you are concerned about the changed color or the pattern caused by splashing water, you can use a metal polish such as Picard to restore it to a clean state. Please use it above.
- Many detergents and chemicals have an effect on metals, so please carefully read the usage precautions printed on the product before using them for maintenance.