[Made to order] MATUREWARE Brass switch plate 2 outlets (0712-2) 1 dimming position
[Made to order] MATUREWARE Brass switch plate 2 outlets (0712-2) 1 dimming position
受注生産商品 Made to order 納期: About 3 to 4 months Delivery time: About 3 to 4 months
For sale
Couldn't load pickup availability
brass casting switch plate
A switch plate made of brass with a comfortable operation feeling, equipped with a toggle switch. You can enjoy the depth of the expression and texture that changes naturally.
"MATUREWARE by FUTAGAMI" is a new brand specializing in FUTAGAMI architectural hardware. Combining "hardware", which means architectural hardware, with "mature", which means "matured", the coined word "matureware" = "matureware" was used as the brand name.
[Made-to-order product] (Delivery time: about 3 to 4 months *Due to the unstable supply of materials, the delivery date may be extended. Please understand.)
Size (mm): W70 x H120 x D9 (D34 *including knob)
Dimming part Φ25×H16
【set content】
・Pedestal ・Toggle switch for 3 roads (dimming is one-sided)
・Knob cover ・Nut cover ・Brass minus screw ・Brass dimming cover
"For LED" Panasonic embedded reverse phase dimmer switch B (single cut) WNS 57511W
・Full-color mounting frame ・Threaded screw for light control mounting *Embedded box and crimp terminals are not included.
[About installation]
This product has cleared the ◇PSE compatibility test.
Installation work requires a qualified electrician, so please ask a professional to install it.
[About dimming]
Please choose from two types, "for incandescent bulbs" and "for LEDs". Both dimmers have a full-color mounting frame and are screwed on the back side of the switch plate. The dimensions protruding from the plate are approximately 36 mm for incandescent bulbs and approximately 45 mm for LEDs, so please prepare an embedded box according to each dimension.
*Since the dimmer switch cannot be used alone, please use it in pairs with the toggle switch.
- For circles, squares, and hexagons, use an embedded box such as Mirai Industry's "SB-1H" (the scissors type "SBP-1H" cannot be used) by rotating it 90 degrees and setting the hole position to the side. To do.
Other sizes are standard sizes and can be used with existing embedded boxes. Please consult with the contractor before placing an order.
照明器具および各種電気製品の海外使用につきまして 当製品は日本国内の電気設備仕様に基づいて設計・製造されております。 そのため、日本国外でのご使用される際は製品が正常に使用・作動できず、故障や発火の原因となる場合がございます。 また、日本国外での使用による損害や故障に関しては、当社は一切の責任を負いかねますので、予めご了承ください。
For overseas customers This product is designed and manufactured based on electrical equipment specifications in Japan. Therefore, when used outside of Japan, the product may not be able to be used or operated properly, which may cause malfunction or fire. Please also note that our company cannot be held responsible for any damage or malfunction caused by use outside Japan.
![[Made to order] MATUREWARE Brass switch plate 2 outlets (0712-2) 1 dimming position](http://www.partsnsupply.com/cdn/shop/products/01_1.jpg?v=1642657712&width=1445)
Handling of brass products
About brass and aging
- Products made from solid brass will change color over time. Please understand it as a characteristic of the material.
- Aging does not always occur uniformly across the product, and unevenness may occur at first. It takes time to get used to the whole thing, so please enjoy the process.
- In places where it is exposed to rain or splashes of water, the surface may have a pattern of raindrops.
- Parts touched with bare hands may cause discoloration, so it is recommended to wear unused gloves made of soft material when handling.
- If you want to slow down the aging process, apply beeswax on a regular basis to give it a glossy look and keep it in the same condition as when it was delivered. (* Beeswax cannot be used on clear coated products. Wipe off with a dry cloth. )
* Secular change may occur before delivery. Please understand beforehand as a characteristic of the material.
*The method and speed of change will vary depending on the installation environment.
* Strong changes may occur in areas where there is a possibility of salt damage.
Care instructions
- If you are concerned about dust or dirt, wipe it with a soft, dry cloth. If the dirt is strong, you can wipe it with water, but be sure to wipe it with a dry cloth at the end.
- If patina (a type of blue-green rust) develops and bothers you, gently polish it with a brass polishing cloth. Please refrain from wiping with chemicals as it may cause uneven wiping.
- If rain or hand prints become black, the blackened area is not dirt but a chemical change, so it cannot be wiped off. Such traces overlap to create an antique texture. As time passes and the overall color changes to a deeper color, the marks will become less noticeable, so please keep an eye on it for a while.
- If you are concerned about the changed color or the pattern caused by splashing water, you can use a metal polish such as Picard to restore it to a clean state. Please use it above.
- Many detergents and chemicals have an effect on metals, so please carefully read the usage precautions printed on the product before using them for maintenance.