1 14

[Bent] Paper Holder Single -2way-

[Bent] Paper Holder Single -2way-

$76.00
$76.00 $76.00
Sale Sold out
Shipping calculated at checkout.

33 in stock

※ビスは付属しません。

An attractive brass paper holder with a beautifully curved arm.

PARTS & SUPPLY original products [Bent series]
The Bent series, which means "bending" in English, is a lineup that focuses on the beautiful "bending" created by the craftsmanship of P&S' local small factories in Osaka.

A simple and modern paper holder that combines a beautifully curved arm with a thick base plate. By using knurled material (see 7th image) for the holding part, it creates an elegant atmosphere in the space.

In addition to being installed as a single item, it is a 2-way specification that allows for ceiling mounting using shelves and brackets. You can purchase an optional shelf board and shelf support, and you can also customize it into a paper holder with a shelf.

*If used in a ceiling position, you will need to manually change the direction of the holding part, so please check the video below for details.


[Product Details]

Size: Approx. W160 x D85 x H60mm (Length of holding part approx. 130mm)

Material: Brass base plate thickness 3mm

Accessories: 2 brass screws 25mm

*If you would like a paper holder with a shelf, please purchase one of the following shelf boards and shelf supports.
[Shelf board] Trimmed oak shelf board unpainted : Size/W380×D120×H20mm, oak wood
 [Shelf bracket ①] Flat Bracket (S) : Size/100×100mm, made of brass [Shelf bracket ②] Arc Bracket : Size/100×100mm, Made of brass

remarks:

  • This product is handmade, so there may be slight individual differences in size and bending.
  • Since we use solid brass material, there may be some deterioration over time before delivery.
  • The arm of the paper holder is fixed with bolts and welding.
  • The product may show discoloration during welding. Please note that this is limited to good quality products.
  • This product has a rough finish during manufacturing, but there may be slight scratches, patterns, or discoloration unique to the material. Please note that all items are within the range of good quality.
  • This product uses brass base material. Discoloration, patina, and darkening may occur due to aging of the material. If you are concerned about these, you can also maintain it with commercially available brass polishing or picard.
  • This product may have "bending marks" during bending. Please note that this is limited to good quality products.
  • The included screws are designed with emphasis on design. When installing, please prepare screws suitable for the location and material.
View full details

Handling of brass products

About brass and aging

  • Products made from solid brass will change color over time. Please understand it as a characteristic of the material.
  • Aging does not always occur uniformly across the product, and unevenness may occur at first. It takes time to get used to the whole thing, so please enjoy the process.
  • In places where it is exposed to rain or splashes of water, the surface may have a pattern of raindrops.
  • Parts touched with bare hands may cause discoloration, so it is recommended to wear unused gloves made of soft material when handling.
  • If you want to slow down the aging process, apply beeswax on a regular basis to give it a glossy look and keep it in the same condition as when it was delivered. (* Beeswax cannot be used on clear coated products. Wipe off with a dry cloth. )

* Secular change may occur before delivery. Please understand beforehand as a characteristic of the material.
*The method and speed of change will vary depending on the installation environment.
* Strong changes may occur in areas where there is a possibility of salt damage.

Care instructions

  • If you are concerned about dust or dirt, wipe it with a soft, dry cloth. If the dirt is strong, you can wipe it with water, but be sure to wipe it with a dry cloth at the end.
  • If patina (a type of blue-green rust) develops and bothers you, gently polish it with a brass polishing cloth. Please refrain from wiping with chemicals as it may cause uneven wiping.
  • If rain or hand prints become black, the blackened area is not dirt but a chemical change, so it cannot be wiped off. Such traces overlap to create an antique texture. As time passes and the overall color changes to a deeper color, the marks will become less noticeable, so please keep an eye on it for a while.
  • If you are concerned about the changed color or the pattern caused by splashing water, you can use a metal polish such as Picard to restore it to a clean state. Please use it above.
  • Many detergents and chemicals have an effect on metals, so please carefully read the usage precautions printed on the product before using them for maintenance.