Lamoe レバーハンドル専用表示錠
Lamoe レバーハンドル専用表示錠
Regular price
¥246.00
Regular price
Sale price
¥246.00
Unit price
per
3 in stock
Lamoeレバーハンドル専用間仕切り錠装置
普遍的でありながら、指に馴染む柔らかなデザイン。
アイコニックなレバーハンドルとの相性も良く、凛とした印象を与えます。
[商品詳細]
サイズ: 画像の図面をご確認ください。
素材: 真鍮
備考:
- こちらの製品はLamoeレバーハンドルと組み合わせてご使用いただけます。
- LAMOEの真鍮製品は経年変化の風合いを、味わいとして楽しんでいただくため、クリアコート等のコーティングはほどこさずに無垢の状態でお届けしております。
- お手元までお届けするまでの期間に変色の進行を遅らせる為の防錆剤を塗布しておりますが、効果には個体差があり、商品によっては開封時に色味に差があることがございます。
- 防錆剤の効果が無くなりますと経年変化が始まりますが、初期段階では変色のムラや指紋跡などが生じることがあります。製品によく触っていただくことで、全体的に色味が濃くなり、ムラや指紋跡も馴染んできます。
- 水しぶきがかかると、水滴の跡がつく場合がございます。多湿の場所でご使用されますと緑青(青錆の一種)が発生する場合があります。気になる場合は真鍮磨きクロスで優しく磨いてください。
Handling of brass products
About brass and aging
- Products made from solid brass will change color over time. Please understand it as a characteristic of the material.
- Aging does not always occur uniformly across the product, and unevenness may occur at first. It takes time to get used to the whole thing, so please enjoy the process.
- In places where it is exposed to rain or splashes of water, the surface may have a pattern of raindrops.
- Parts touched with bare hands may cause discoloration, so it is recommended to wear unused gloves made of soft material when handling.
- If you want to slow down the aging process, apply beeswax on a regular basis to give it a glossy look and keep it in the same condition as when it was delivered. (* Beeswax cannot be used on clear coated products. Wipe off with a dry cloth. )
* Secular change may occur before delivery. Please understand beforehand as a characteristic of the material.
*The method and speed of change will vary depending on the installation environment.
* Strong changes may occur in areas where there is a possibility of salt damage.
Care instructions
- If you are concerned about dust or dirt, wipe it with a soft, dry cloth. If the dirt is strong, you can wipe it with water, but be sure to wipe it with a dry cloth at the end.
- If patina (a type of blue-green rust) develops and bothers you, gently polish it with a brass polishing cloth. Please refrain from wiping with chemicals as it may cause uneven wiping.
- If rain or hand prints become black, the blackened area is not dirt but a chemical change, so it cannot be wiped off. Such traces overlap to create an antique texture. As time passes and the overall color changes to a deeper color, the marks will become less noticeable, so please keep an eye on it for a while.
- If you are concerned about the changed color or the pattern caused by splashing water, you can use a metal polish such as Picard to restore it to a clean state. Please use it above.
- Many detergents and chemicals have an effect on metals, so please carefully read the usage precautions printed on the product before using them for maintenance.