Skip to product information
1 of 7

Brass Nameplate (Integrated)

Brass Nameplate (Integrated)

受注生産商品 Made to order 納期: Approximately 1 month to 1 and a half months Delivery time: Approximately 1 month to 1 and a half months

Regular price $733.00
Regular price Sale price $733.00
Sale Sold out
Tax included. Shipping calculated at checkout.
size

For sale

Stylish and solid brass nameplate

The letters are hollowed out from a brass plate with a thickness of 10 mm, and cut letters with a thickness of 12 mm are inserted into them.

Choose from 3 sizes. Alphabet characters only. The price is the same for up to 6 characters, and 3,630 yen (including tax) per character from 7 characters onwards.

*We do not accept cancellations after the order has been confirmed.

[Made-to-order product] (Delivery date: about 1 month to 1 and a half months)

[ Product Details ]

Size and maximum number of characters (English only)

①115 × 115mm / Up to 7 uppercase letters and 9 lowercase letters
②150 × 90mm / Up to 9 uppercase letters and 12 lowercase letters
③250 × 50mm / Up to 14 uppercase letters and 20 lowercase letters


Material: Brass

Delivery time: About 1 month to 1 month and a half (after confirmation of payment)

Surface treatment: matte finish

Installation method: Embed the bolts (diameter 6mm, length 25mm ) welded on the back of the main unit into the wall. A construction sheet that shows the bolt positions is included at the time of delivery, but there may be some deviation from the actual product, so please use the sheet to determine the installation position, and mark the holes using the actual product before drilling. (Because it is necessary to drill a hole in the wall, please consult with the contractor in advance.)
* Click here for a construction sheet sample

remarks

  • Chinese characters are not allowed, and only alphabetic characters will be produced.
  • In environments where it is exposed to rain, the condition at the time of delivery may differ significantly.
  • Since the plate is hollowed out with a single stroke, the letters "A, B, D, O, P, Q, R, a, b, d, e, g, o, p, q" have a gap of about 0.9 mm. increase.
  • This product is made of brass material, so it may change over time before delivery. Please understand beforehand as a characteristic of the material.
  • This plate does not have a completed drawing.
  • At the time of delivery, the nameplate is wrapped in a protective bag.
    Carefully open the protective bag to avoid scratching the surface.
  • At the time of delivery, protective caps are attached to the four legs (shafts), so please remove them during installation.
View full details

Handling of brass products

About brass and aging

  • Products made from solid brass will change color over time. Please understand it as a characteristic of the material.
  • Aging does not always occur uniformly across the product, and unevenness may occur at first. It takes time to get used to the whole thing, so please enjoy the process.
  • In places where it is exposed to rain or splashes of water, the surface may have a pattern of raindrops.
  • Parts touched with bare hands may cause discoloration, so it is recommended to wear unused gloves made of soft material when handling.
  • If you want to slow down the aging process, apply beeswax on a regular basis to give it a glossy look and keep it in the same condition as when it was delivered. (* Beeswax cannot be used on clear coated products. Wipe off with a dry cloth. )

* Secular change may occur before delivery. Please understand beforehand as a characteristic of the material.
*The method and speed of change will vary depending on the installation environment.
* Strong changes may occur in areas where there is a possibility of salt damage.

Care instructions

  • If you are concerned about dust or dirt, wipe it with a soft, dry cloth. If the dirt is strong, you can wipe it with water, but be sure to wipe it with a dry cloth at the end.
  • If patina (a type of blue-green rust) develops and bothers you, gently polish it with a brass polishing cloth. Please refrain from wiping with chemicals as it may cause uneven wiping.
  • If rain or hand prints become black, the blackened area is not dirt but a chemical change, so it cannot be wiped off. Such traces overlap to create an antique texture. As time passes and the overall color changes to a deeper color, the marks will become less noticeable, so please keep an eye on it for a while.
  • If you are concerned about the changed color or the pattern caused by splashing water, you can use a metal polish such as Picard to restore it to a clean state. Please use it above.
  • Many detergents and chemicals have an effect on metals, so please carefully read the usage precautions printed on the product before using them for maintenance.