Skip to product information
1 of 8

【Bent】 Arc Bracket Satin finish(マット仕上げ)※6/7~6/28まで10%OFF

【Bent】 Arc Bracket Satin finish(マット仕上げ)※6/7~6/28まで10%OFF

Regular price $41.00
Regular price $46.00 Sale price $41.00
Sale Sold out
Tax included. Shipping calculated at checkout.

148 in stock



PARTS & SUPPLYオリジナルプロダクト


【Bent】Satin finishシリーズの製品は、職人の手によって美しいビーズブラスト仕上げが施されております。 一般的なサンドブラストとは異なる粒子を吹き付けることで、マットな質感でありながら、きらめきを宿した滑らかな仕上がりを実現しております。 通常のBENTシリーズに施されているラフ仕上げとは一線を画する上質な仕上がりをぜひご体感ください。

半円型の真鍮を曲げたArc Bracketは、丸みのあるデザインと繊細な細さが特徴的。


サイズ(mm): 100×100【※1本入り】

素材: 真鍮

付属品: なし ※ビスは付属しません。
壁付け用: 真鍮丸皿プラス木ネジ 8×4.1×25mm
棚板用: 真鍮丸皿プラス木ネジ (8×4.1×16mm)


  • 本商品はハンドメイド商品になりますので、寸法や曲げに若干の個体差がございます。
  • 真鍮無垢の素材を使用しておりますので、お届けまでに経年変化が発生する場合がございます。
  • 素材の特性上、固有の小傷や模様、変色のある場合がございます。いずれも良品の範囲とさせていただいておりますので、予めご了承ください。
  • 本商品は真鍮素地の素材を使用しております。素材特有の経年変化により変色や緑青、黒ずみが発生する場合がございます。これらが気になる場合は市販の真鍮磨きやピカールなどでメンテナンスも可能です。※こちらはサテン仕上げのため、ピカール等を使用するとさらさらとしたマットな質感が損なわれてしまいますのであらかじめご了承ください。
  • 本製品には曲げ加工の際に「曲げ跡」が発生する場合がございます。こちらは良品の範囲とさせていただいておりますので、予めご了承ください。
  • 仕上げの性質上、傷が目立ちやすくなっております。
View full details

Handling of brass products

About brass and aging

  • Products made from solid brass will change color over time. Please understand it as a characteristic of the material.
  • Aging does not always occur uniformly across the product, and unevenness may occur at first. It takes time to get used to the whole thing, so please enjoy the process.
  • In places where it is exposed to rain or splashes of water, the surface may have a pattern of raindrops.
  • Parts touched with bare hands may cause discoloration, so it is recommended to wear unused gloves made of soft material when handling.
  • If you want to slow down the aging process, apply beeswax on a regular basis to give it a glossy look and keep it in the same condition as when it was delivered. (* Beeswax cannot be used on clear coated products. Wipe off with a dry cloth. )

* Secular change may occur before delivery. Please understand beforehand as a characteristic of the material.
*The method and speed of change will vary depending on the installation environment.
* Strong changes may occur in areas where there is a possibility of salt damage.

Care instructions

  • If you are concerned about dust or dirt, wipe it with a soft, dry cloth. If the dirt is strong, you can wipe it with water, but be sure to wipe it with a dry cloth at the end.
  • If patina (a type of blue-green rust) develops and bothers you, gently polish it with a brass polishing cloth. Please refrain from wiping with chemicals as it may cause uneven wiping.
  • If rain or hand prints become black, the blackened area is not dirt but a chemical change, so it cannot be wiped off. Such traces overlap to create an antique texture. As time passes and the overall color changes to a deeper color, the marks will become less noticeable, so please keep an eye on it for a while.
  • If you are concerned about the changed color or the pattern caused by splashing water, you can use a metal polish such as Picard to restore it to a clean state. Please use it above.
  • Many detergents and chemicals have an effect on metals, so please carefully read the usage precautions printed on the product before using them for maintenance.