[Bent] Paper Holder Double -2way-
[Bent] Paper Holder Double -2way-
50 in stock
*Screws are not included.
A brass paper holder with beautifully curved arms.
[Bent Series]
The Bent series, a PARTS & SUPPLY original product, means "bend" in English and is a lineup that focuses on beautiful "bends" made by the craftsmen at P&S's local local factories in Osaka.
A simple and modern paper holder with a beautifully curved arm and a thick base plate. The presser part is made of a material with a knurled finish (see image) , which creates an elegant atmosphere in the space.
In addition to being installed as a single item, it can also be attached to the ceiling using a shelf board or bracket, making it a 2-way specification. By combining it with a shelf board and shelf bracket (sold separately), you can also customize it into a paper holder with a shelf.
[Product Details]
Size: Approx. W310 x D85 x H60mm
Material: Brass Base Plate Thickness 3mm
Accessories: None *Screws are not included.
Recommended screws: brass round head Phillips wood screws 8 x 4.1 x 25 mm
*If you are using it on the top, you will need to manually change the direction of the clamping part. Please see the video below for details.
If you would like to make a paper holder with a shelf, please purchase one of the shelves and shelf brackets below.
[Shelf board] Trimmed oak shelf board, unpainted : Size: W380×D120×H20mm, oak
[Shelf Bracket ①] Flat Bracket (S) : Size: 100 x 100 mm, made of brass
[Shelf Bracket ②] Arc Bracket : Size: 100 x 100 mm, made of brass
[Brass screws]
For mounting shelves: brass round head Phillips wood screws (8 x 4.1 x 16 mm)
remarks
- This product is handmade, so there may be slight individual differences in dimensions and bending.
- As the product is made of solid brass, there may be some changes in the material over time before delivery.
- The paper holder arms are fixed with bolts and welding.
- Discoloration may be seen on the product due to welding. Please note that this is considered to be within the range of acceptable quality.
- This product is roughly finished during manufacturing, but there may be small scratches, patterns, and discolorations inherent to the material. Please note that all of these are considered to be within the range of acceptable quality.
- This product is made of brass. Due to the inherent aging process of the material, discoloration, verdigris, and blackening may occur. If you are concerned about these, you can maintain it with commercially available brass polish or Pical.
- This product may have "bending marks" due to bending processing. Please note that this is considered to be within the range of acceptable quality.
- The included screws are designed with an emphasis on design. When installing, please prepare screws suitable for the location and material.
Handling of brass products
About brass and aging
- Products made from solid brass will change color over time. Please understand it as a characteristic of the material.
- Aging does not always occur uniformly across the product, and unevenness may occur at first. It takes time to get used to the whole thing, so please enjoy the process.
- In places where it is exposed to rain or splashes of water, the surface may have a pattern of raindrops.
- Parts touched with bare hands may cause discoloration, so it is recommended to wear unused gloves made of soft material when handling.
- If you want to slow down the aging process, apply beeswax on a regular basis to give it a glossy look and keep it in the same condition as when it was delivered. (* Beeswax cannot be used on clear coated products. Wipe off with a dry cloth. )
* Secular change may occur before delivery. Please understand beforehand as a characteristic of the material.
*The method and speed of change will vary depending on the installation environment.
* Strong changes may occur in areas where there is a possibility of salt damage.
Care instructions
- If you are concerned about dust or dirt, wipe it with a soft, dry cloth. If the dirt is strong, you can wipe it with water, but be sure to wipe it with a dry cloth at the end.
- If patina (a type of blue-green rust) develops and bothers you, gently polish it with a brass polishing cloth. Please refrain from wiping with chemicals as it may cause uneven wiping.
- If rain or hand prints become black, the blackened area is not dirt but a chemical change, so it cannot be wiped off. Such traces overlap to create an antique texture. As time passes and the overall color changes to a deeper color, the marks will become less noticeable, so please keep an eye on it for a while.
- If you are concerned about the changed color or the pattern caused by splashing water, you can use a metal polish such as Picard to restore it to a clean state. Please use it above.
- Many detergents and chemicals have an effect on metals, so please carefully read the usage precautions printed on the product before using them for maintenance.