Handling of Cabinet CUBE (washstand)

(see on another page)

About material

This product is made of solid teak and is unpainted. In a dry environment, the wood may shrink and crack or chip.
When humidity rises like in the rainy season, cracks may return to their original state.
To prevent the wood from drying out, we recommend that it be treated with beeswax on a regular basis. (We do not handle beeswax wax)

State of cracks due to drying
beeswax wax

*There may be cracks or chips when the product is delivered. Also, since it is an overseas product, there may be small scratches during transportation. Neither is a defective product, so please understand it as a characteristic of the product.

There may be cracks due to drying already at the time of product delivery.
Example of small scratches during transportation①
Example of small scratches during transportation②
Example of small scratches during transportation ③

Mounting method

(1) Check the size of the main unit and attach the included hardware to the wall.
(2) Hook the hardware on the main unit side to the hardware on the wall
③ Turn the bottom screw to adjust the gap with the wall.
Installation image seen from the back side
* Hardware changes depending on the production time. There are two types, one of which is included.

About opening and closing the door

When the door is opened more than 45°, the stopper will slowly close the door.

45° open

About door adjustment

The door can be adjusted by adjusting the screw inside the door.

Rear screw adjusts the door fore and aft
Adjust the left and right of the door with the screw on the front side